Products & Services

    Styrene, also known as vinylbenzene, is an organic compound with the chemical formula C8H8. It is a colorless or yellowish oily liquid with a special aromatic odor, flammable, and can form an explosive mixture with air.

    SM as one of the most important monomers in chemical industry, is widely applied to produce PS,EPS,ABS,SAN,UPR,SBR,SBL,SBS,SEBS,K resin etc.

    SECCO SM Plant has an annual production capacity of 675,000 tons.

Ethylene
Ethylene is produced by steam cracking Naphtha and other hydrocarbon streams. Ethylene (C2) is a colourless gas with a slightly sweet smell. SECCO uses ethylene to make polyethylene, styrene and polystyrene, which in turn are used to manufacture a wide variety of products from food packaging to toys. It is of fundamental importance to the plastics industry and is the basic building block of organic chemistry. 

Propylene
Propylene (C3) is a colourless gas. It is highly flammable and can be used as a substitute for LPG (Liquefied Petroleum Gas). It is easier to transport propylene than ethylene as it can be liquefied at much lower pressures and is conveyed in its liquid form. SECCO uses propylene to make polypropylene, a plastic used in cars and toys, and acrylonitrile, a chemical used to make acrylic fibres. 

Butadiene
Butadiene (CH2=CH-CH=CH2) is a colourless gas with a slight sweet and fragrant odorodour at room temperature; is soluble in organic solvents, insoluble in water; is inflammable and its explosion limits ranges between 2% and 11.5%. As one of key petro-chemicals, it is mainly used for manufacture of various synthetic rubbers (SBR, NBR, PBR), also for process of synthetic resin, fibres and fine chemicals, such as ABS, BS & SBS etc. 

Toluene
Toluene is a colourless liquid with a sweet, pungent, benzene-like odorodour; is flammable and produces poisonous gas in a fire; containers of it may explode in fire. It is slightly soluble, and incompatible with strong oxidizers. As one of key basic chemical materials, it is widely used in the manufacture of other chemicals and as an ingredient in fuel, paint, glues and adhesives.

    Acrylonitrile, or Cyano-ethylene (CH2=CH-CN), is a colourless inflammable liquid with drastic toxicity and irritation irritating smell; dissolves slightly in water and quite well in common organic solvent. There exists the danger of burning and explosion when it meets with fire, high temperature and oxidants. Acrylonitrile vapor and air can form an explosive mixture, in case of open fire, high heat easy to cause combustion, and release toxic gas, Acrylonitrile reacts violently with oxidants, strong acids, strong bases, amines and bromine.

    Acrylonitrile is widely used in polymer synthesis and fine chemical raw materials, mainly used in the production of synthetic fiber (polyacrylonitrile fiber), ABS resin (acrylonitrile-butadiene-styrene copolymer), AS resin (also known as SAN, acrylonitrile -styrene resin), acrylonitrile-butadiene rubber, adiponitrile, acrylic resin, coatings, adhesives and pharmaceuticals etc.

    SECCO AN plant consists of two production lines, each one has an annual production capacity of 260,000 tons.